Call (818) 990-4621

2015 BMW 428i

//2015 BMW 428i

2015 BMW 428i

BMW 428i

Mileage
44,025
Service Date
1/8/2024
Services Performed
  • SPARK PLUGS – Remove & Replace
  • ROLL-OVER PROTECTION SYSTEM – ACTIVATE – [Open the convertible top or retractable hardtop. Activate automatic rollover protection systemvia OBD diagnostic link.] HORN, HEADLAMP FLASHERS, HAZARD FLASHERS, TURN SIGNALS – CHECK A/C & HEATING SYSTEMS – INSPECT – [Inspect heater and air-conditioning blower.] BATTERY – INSPECT – [Check state of charge (magic eye) and charge if required.] BRAKE SYSTEM – INSPECT – [For the Brake System Connections and Lines: check for leaks, damage and correct positioning.] COOLANT LEVEL – INSPECT – [Check coolant fluid level and concentration.] LIGHTS & CONTROLS – INSPECT – [Check lighting system, i.e.: headlights, foglights, parking, back-up, license plate, interior (including map reading lights), glove box, flashlight, illuminated makeup mirrors, luggage compartment/area lights.] REAR VIEW MIRRORS – INSPECT SEAT/SAFETY BELTS – INSPECT – [Check condition and function.] SRS AIRBAG UNITS – INSPECT – [Visually inspect units for torn covers, obvious damage or attachment of stickers.] STEERING SYSTEM – INSPECT – [Check for clearance, leaks, damage and wear.] TIRES – INSPECT – [Check tread depth, wear pattern, outer condition, inflation pressure. Correct pressure if necessary.] UNDERBODY CONTACT POINTS & LINKAGE – INSPECT – [Inspect underbody, including all visible parts (i.e. transmission, rear axle, fuel lines, exhaust system), check for damage, leaks and corrosion.] WINDSHIELD WASHER FLUID AND ANTIFREEZE PROTECTION – INSPECT – [Check protection level, fluid level, top if necessary.] WINDSHIELD WIPER & WASHER SYSTEMS – INSPECT – [Check windshield wiper and washer jet positions.] CONDITION BASED SERVICE SYSTEM (CBS) – RESET – [Reset the CBS after every service.] TIRE PRESSURE MONITORING SYSTEM SENSORS – RESET VEHICLE – ROAD-TEST – [Check brakes, steering, shock absorbers (visual) and Transmission.]
  • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
  • Drain and refill your vehicle's crankcase with BMW approved oil. Install a new genuine BMW oil filter Check all other Fluid levels, and top off as necessary. Check and adjust tire pressure. Reset oil light
 
Andi L. gave our service a 5 star review on 1/9/2024
2024-01-10T23:01:54+00:00