Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Cari C. gave our service a 5 star review on 5/13/2024
BATTERY – Remove & Replace – MAIN – [Includes: Test.]
Change engine oil and filter while engine is at normal operation temperature. Check transmission for leaks. Check rear axle for leaks. Visually check fuel tank, lines, and connections for leaks. Check condition, position, and mounting of exhaust system. Examine for leaks. Check power steering system for leaks. Check overall thickness of front and rear disc brake pads. Examine brake disc surfaces. Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc. Check front control arm bushing for wear. Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning. Adjust parking brake if necessary. Check all tire pressures correct if necessary. Check condition of tires (outer surfaces (left/right)), tread wear and pattern(rotate if necessary); Half-shafts; check for leaks at flexible boots. Read out diagnostic system Check engine cooling system/heater hose connections for leaks. Check coolant level and antifreeze protection level; add coolant if necessary. Check level of brake and clutch fluid in reservoir; add fluid if required. Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary. Reset Service Indicator. Check wiper and washer system(s); wiper blades(replace if necessary), washer jet positions Replace microfilter or Acc Cabin Filter.
Hansi R. gave our service a 5 star review on 5/6/2024
TURBOCHARGER COOLANT HOSE – Remove & Replace – Both
Drain and refill your vehicle's crankcase with BMW approved oil. Install a new genuine BMW oil filter Check all other Fluid levels, and top off as necessary. Check and adjust tire pressure. Reset oil light
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Craig L. gave our service a 5 star review on 5/2/2024